Top Pearl Hardware >Seeds Peeling, Separating and cleaning machine

JXB26

SEMI-AUTOMATIC SELECTING MACHINE

 

SEMI-AUTOMATIC SELECTING MACHINE

Function:

It can be used to select grains and oil crops, seeds and kernels etc.In traditional workmanship, kernels

 

COMPONENTS
The machine consists of trestle table, feed-in hopper, vibrating scattering device, conveyer belt, negative-pressure pneumatic impurity suction pipe, impurities bin, speed control panel and lamp.


MAIN PARAMETERS
Voltage: 220v
Power: 50w
Volume: 700mm ¡Á 700mm ¡Á1150mm
Weight: 48kg
Noise: 60db max.

 

THE CLEANING EQUIPMENT FOR BEANS
QLD1600/2400/3200

Functions:

It can be used to sort out the various impurities in the beans (including big impurity, small impurity, light impurity, the impurity with the almost same volume and weight compared with beans, dust/dirt, etc.), separate (sorting out the irregular beans such as the split beans and folded beans, etc.).

Technical Parameter:

Power:2.34kw/2.58kw(380v)

Process capacity:1.2-3.2Ton

Cleaning rate:99.8% min

Rate of sorting out the imperfect beans:85% min

Height:2.84M, Weight:2.5ton, Operator: 2 person


 

TFD600

THE DECORTICATING AND SEPARATING EQUIPMENT FOR BEANS

Functions:

It is a special equipment for producing peeled ?mung beans, it can be used to decorticate mung beans, separate the bran from the peeled mung beans, and separate mung beans from peeled ones. The equipment features high automation degree, timing of process, sound and visual alarm, self-locking in case of stop, high percentage of peeled mung beans and high percentage of whole ones and good peeling result

Component
The equipment consists of the feed-in hopper, elevator, trolley, grinder (4sets), vibrating sieve (2sets), sieve for removing bran and separating sieve

Process
feeding¡ú elevating¡úfeeding by trolley ¡úgrinding¡ú conveying ¡ú sorting out bran¡ú separating ¡úpeeled mung beans

Main parameter
Power: 34.8kw
Output: 600kgs/hour min.
% of peeled mung beans: 75%min.
% of the whole peeled mung beans: 42% min.
Space occupied: 14.5m ¡Á 2.65 m
Height: 3.1m

 

MULTI-FUNCTION CLEANER
CZZ100
Function:

It not only can be used to sort out big impurities, small impurities, light impurities, immature seeds, fluff and dust but also the heavy impurities like clod, stones, glass, metal pieces etc. in the raw materials. It's mainly applied to the fields of agro-products cleaning industry. The cleaner features low power consumption, compact design of structure, little damage of materials, good result of sorting out impurities once only.

COMPONENT
The cleaner consists of the sieve body, cyclone collector, blower, discharger, vibro motor and structure frame etc. The cleaner need to be equipped with elevator when it is used individually.


APPLICABLE SCOPE
Sunflower seeds, grass seeds, pumpkin seeds and sesame seeds

MAIN PARAMETER
Voltage: 380v
Power:1.84 Kw
Input Processing Capacity: 1.0t/h min.
Rate of sorting out heavy impurities: 99.7% min.
Rate of sorting out other impurities: 99% min.
Occupied area: 3.5m¡Á2.8m
Weight: 1.5t



 

Distributed choke-relief and Cluster

Dehuller for sunflower seeds

 

THE HULLING AND SEPARATING EQUIPMENT
FOR PUMPKIN / WATERMELON SEEDS
TFHB150£­¢ñ

Functions:

It can be used to hull, remove shells, separate and re-separate for pumpkin/watermelon seeds.
The distinguished characteristic of the equipment is that there is no need to grade the raw materials into more grades, only the AA grade need to be graded into 2 grades and processed separately. Furthermore, there is no need to separate the kernels from seeds by sieves any more, but the positive-pressure separator. Therefore, the process has been simplified and the automatization degree and efficiency have been improved greatly.

COMPONENT
1.The equipment consists of feed-in hopper,2.vibrating scatter, 3.combined spiral elevator,main part of machinery (4.huller, 5.shells collector, 6.positive-pressure separator which separate the seeds from the kernels, 7.cyclone, 8.spiral discharger), 9.double-outlet spiral elevator,10.positive- pressure separator and electric control cabinet.

MAIN PARAMETER
Power : 10.43kw (380)
Output: 100Kg/hour
Whole kernels rate: 95% min.
(Broken kernel is less than 1/2 of whole kernel)
Content of seeds in the kernels: 3% max.
Content of seeds and kernels in the shells: 0.3% max.
Occupied area : 9.7m X 3m
Height: 3.8m
Weight: 6.2t
Operator: 2-3 persons

 

THE CLEANING AND GRADING EQUIPMENT
FOR PUMPKIN/WATERMELON SEEDS
QLFHB600

Function:

It can be used to clean various impurities in the pumpkin/watermelon seeds, and then grade them. The equipment features easy operating and good result of cleaning and grading.

COMPONENT
The equipment mainly is made up of feed-in hopper, elevator, 2 circular-motion vibrating cleaner, rectilinear-motion vibrating grader and central control cabinet.

PROCESSING
elevating ¡ú cleaning big and small impurities, dust, light impurities and some empty seeds ¡ú cleaning the impurities with the almost same volume and weight firstly ¡ú cleaning the impurities with the almost same volume and weight secondly ¡ú elevating ¡ú grading

Main Parameter
Power: 5.54kw (380v)
Capacity: 0.6¡«0.8 t/h
Content of impurity after separating: 0.15% max.
(free of stone, hair, glass, metal.)
Rate of Seeds in impurity: 1¡«3%
Occupied area: 10m ¡Á3.0m
Height: 3.4m
Weight: 4t
Operator: 2 persons

?


 

TFHS 1500

The cleaning hulling and separating equipment for peanuts

FUNCTIONS AND FEATURES
This equipment is mainly used for cleaning, hulling and separating of peanuts in shell, which features high efficiency of cleaning rate, continuity of operation for hulling, separating and shell-removing, high rate of whole kernels due to the returned materials can go back to the huller directly for re-hulling, higher output, high degree of automatization of operation and clean production environment. It is the preferred equipment for professional peanuts processing plant.

COMPONENTS
This equipment is mainly consists of feed-in hopper, elevator, raw materials cleaner, huller, separator, blower for shell-removing and electric control cabinet. Customers may use their own elevator or purchase the elevator from our company.

Main Parameter:

Power:11.9kw(380v)

Input processing capacity:2.2ton/hour

Hulling rate:80% approx rate of whole

Kemels:98%min

Height:3M, Weight:4Ton, Operator:2 persons

Vibrating-Scattered Conveyer Belt for Quality Inspection
CSD80
FUNCTIONS AND FEATURES

The conveyer belt is mainly used for quality control & manual inspection of grains and oil crops, seeds and kernels, and also can be used for short distance conveying of material. In-put materials can be automatic scattered evenly, which lead to a reduction in the labor cost.

COMPONENT
The conveyer consists of structural frame, driving roller, driven roller, idler roller, conveyer belt skirting, slide chute and decelerating motor.

MAIN PARAMETERS
Power: 0.8kw
Conveying speed: 7.8m/minute
Space occupied: 5.5m ¡Á 1.5m
Height: 0.8m
Weight: 300kgs

THE CLEANING EQUIPMENT
FOR PUMPKIN /WATERMELON KERNELS BEFORE PACKING
QLHBR800

Function:

It can be used to clean the various impurities (hair, stone, glass, metal) and adjust the rate of broken kernels in finished products.The equipment features easy operating and good result of cleaning.

COMPONENT
The equipment mainly consists of feed-in hopper, 2-grade 4 circular-motion and vibrating cleaner for the impurities with almost the same volume and weight compared with materials, vibrating and suction cleaner for light impurities, the device of removing irons, separating machine without any holes, 2 combined spiral elevators and electric control cabinet.

MAIN PARAMETER
Power: 10.34kw (380v)
Processing capacity:0.8 t / h
Content of impurities after cleaning: 0.1%max.
(free of hair, stone, glass, metal)
Broken kernels : can be adjusted in the range of
3-10% according to requirement (Broken kernel
is less than 1/2 of whole kernel).

Occupied area:8.8Mx 5.5M, Height:3.4M, weight:5.2ton, Operator:2 persons

KLKH SERIES OF CONTINUOUS GRAIN OVEN

It adopts infrared as heating source, with the materials vibrating and conveying and rolling over along the heating source. Through the silicon controlled rectifier, the temperature inside the oven could be smoothly kept in the required range so that the materials would be roasted evenly without burn. Its distinguished characteristics are symbolized by its very few loss of heat and no burn of materials and even roasting. It is a great cut-down on manpower and there is no loss of raw materials. It is suitable for various kernels and seeds with the diameter less than 20mm, and the materials that are not easy to be damaged and not easy to be stick tight.

MAIN PARAMETERS
Power£º4.86kw£¨220V£©among which the maximum heating power is 4.5kw, the vibrating and conveying power is 0.36kw
Temperature of the oven chamber: 0-250¡æ(no load)
Volume£º0.86m¡Á1.17m
Weight£º236Kg
Output£º10-20Kg/h
Service condition: ambient temperature:18¡æmax. (the lower temperature, the lower output), moisture of materials: 14%max

PINE NUTS SEPARATOR

FUNCTIONS AND FEATURES
It can be used to separate the pine nut shells from kernels, and meanwhile the light impurities and dust can be cleaned properly. It features low power consumption, compact structure, low wastage of material and good effect of the one stroke of separation. It is the ideal option for the companies who are engaged in pine nuts processing and export.

MAIN PARAMETERS
Voltage: 380v
Power: 2.15kw
Input Processing Capacity: 0.7-1.0t/h
Cleaning Rate: 90%
Occupied Area: 3.0m¡Á2.8m
Height: 2.6m
Weight: 1.0t

 

TSZ SERIES OF COMBINED SPIRAL ELEVATOR

FUNCTIONS AND FEATURES

It consists of several joint parts that the height can be adjusted by the increase or decrease in the quantity of joints according to the required elevating height. Comparing with pneumatic elevator &. hopper elevator, it has the salient features of no damage materials and adjustable elevating height. Among which materials elevated by double-outlet combined spiral elevator can be conveyed both forward and backward

APPLICABLE SCOPE

Grain crops
Puddy Rice ,Rice, Wheat, Sorghum, Corns, Buckwheat, Oats etc.
Oil crops
Sunflower seeds and sunflower kernels, Peanuts and Peanut kernels, Soya beans etc.
Beans
Red beans, Mung beans and Peas etc.
Minerals
Particle or small plump minerals
Others
Various kinds of nuts and their shells.

MAIN PARAMETER

Power£¨kw£©
Elevating capacity(t/h)
Height£¨m£©
Voltage£¨v£©
Operator
TSZ45(¦µ450)
0.74
0.8
1-3.0
380
1
TSZ60(¦µ600)
1.1
1.8
1-3.0
380
1
TSZ80(¦µ800)
1.1
2.5
1-3.0
380
1
TSZC60(600)
0.74
0.8
1-3.0
380
1

DEHULLER FOR IN-SHELL ALMONDS
FUNCTIONS AND FEATURES
The dehuller can be used to clean, grade, hull and separate the in-shell almonds.

COMPONENTS
The dehuller mainly consists of feed-in hopper, vibrating elevator, main part of machinery for hulling and separating, multi-layer suction separator

Main Parameters:

Power:6.7kw(380v), Input Processing capacity:0.7ton/hour, rate of whole kermels:0.3%, rate of shells inkermels:5%, Occupied area:1.5m x 5.7m , height:3.2m weight:3.0ton, Operator: 2 persons

The Circular Motion and Vibrating Cleaner for removal of the Impurities with almost Same Volume and Weight compared with Materials
CZYZ135

FUNCTIONS AND FEATURES
The cleaner not only can sort out heavy impurities from sunflower seeds, sunflower kernels, pumpkin seeds and pumpkin kernels (for example clod, stones, glasses and metals), but also the obvious light and empty grains, fluff and dust, etc. It is mainly applied to the fields of kernels processing & kernels trade etc. The cleaner features low power consumption, compact design of structure, little damage of materials, good result of sorting out impurities at 1st round, etc

COMPONENTS
The cleaner consists of the sieve body, cyclone collector, blower, discharger, vibro motor, structure frame. The elevator should be equipped with when the cleaner is used individually.

APPLICABLE SCOPE

sunflower seeds, sunflower kernels, pumpkin seeds and pumpkin kernels.


Main parameters
Voltage: 380V
Power: 1.6Kw
Processing Capacity: 0.4t/h min.
Rate of sorting out heavy impurity with almost the same volume and weight compared with materials: 99.7% min.
Occupied area: 2.8m ¡Á 1.8m
Height:2.7m
Weight: 850kgs

SUNFLOWER SEEDS DEHULLING AND SHELL-REMOVING MACHINE FOR OIL INDUSTY TFYK5000

FUNCTION AND CHARACTERISTIC
It can be used in the sunflower oil producing line when composed with sunflower seeds cleaning machine and oil press machine. The can play two roles in oil extracting industry-hull seeds and separate shells.

COMPONENT
The equipment is mainly made up of input hopper, huller, vibrating and conveying wind-power separater.
The customers need to prepare raw material elevator and raw material cleaning machine as attachment. We can also offer them according to customer's request.

PROCESSING
Sunflower seeds feed-in¡úHulling ¡úshell-removing ¡ú sunflower kernels used for oil industry.

MAIN PARAMETER
Power: 9.34 KW (380v)
Processing capacity: 3Ton /Hour
Content of shells in the kernels: 20% max.
(include shells of un-hulled seeds)
Loss of material during hulling: 0.4% max

Occupy area:4.1m x 1.7m, height:3.65m, weight:2tons

 

Vibrating Sliding & Rolling Cleaner for Removal of the Impurities with almost Same Volume and Weight compared with Beans
CZD 1000/2000

Functions & Features

It have applied for patent right in many countries. They can sort out the impurities with the almost same volume and weight in beans (Soybeans and mung beans, etc.), and meanwhile sort out the imperfect beans (splits, brokens, folded beans

The machine features low power consumption, compact design of structure, easy operation and easy maintenance, minimum space, little damage of material and kernels sorted out together with impurities can be used again after 2nd round of cleaning. It is the ideal device for beans cleaning & separating worldwide

Components

This device consists of sieve body, vibro motor and main structural frame.
The individual machine can be equipped with feed in hopper combined spiral elevator.

 

[Beans] [Contact Us] [Other Countries] [Our Director] [Garlic]
[Medicine] [Samples] [Spices] [Site Map] [Home]


Email: info@toppearl.com
Phone: +86 755 2585 7534
Fax: +86 755 2585 7535